Masking lacquer red

Masking lacquer red is suitable for masking surfaces when only partial plating is required. Recommended for the masking of larger surfaces areas. Masking lacquer red is very easy to apply and generally shows good resistance to the electrolytes.

Before masking with the lacquer, the work piece must be free of grease and clean. We recommend preliminary ultrasonic or electrolytic degreasing. Once the masking lacquer has been applied, excessive degreasing times should be avoided as well as the stress of ultrasonic or electrolytic degreasing.

If required the lacquer can be diluted before use with thinner. The degree of dilution depends on the way of applying the lacquer and should possibly be determined by a preliminary test. The lacquer can be applied by means of a brush, a roller or airbrush. After the treatment, the lacquer can be removed by thinner.

Technical Details:

Drying: Air drying
Dust and dry to the touch: at least 15-20 minutes, better 60 minutes.
Mounting fixed: about 3-4 hours
Thoroughly dry: 12-15 hours

Contents: 100ml

• Safety data sheet
• ChemVerbotsV