Epilame Fixodrop
Standard epilams which are easy to apply. They offer the advantage of being extremely robust and insensitive to the condition of the surfaces to be treated. This product can be applied to all materials and is not very sensitive to the contamination of baths or impurities that may be present on the surfaces to be treated.
Epilame Previous product2/6Next product
Moebius Epilam Fixodrop ES
Almost all cases of uncontrolled oil-spread can be combated by the use of Fixodrop ES. Applying an epilam coating brings long-term assurance for minimum additional cost. It is indispensable if mechanisms have to remain functional with very thin, wide-temperature-range oils over a long period of time.
Fixodrop ES/BS was specially developed for the treatment of rubies, steel, brass and other metals. Suitable for mechanical watches and quartz movements of all sizes and designs.
Preparation:
Before the Fixodrop treatment, all parts must be cleaned and dried. This step is important and strongly influences the adhesion of the epilam. Fixodrop-treated anchor pallets should only be lubricated after a drying time of 1 to 2 minutes.
Product Name: Fixodrop ES / BS 8981 (formerly Fixodrop FK / BS 8941)
Technical data - solvent:
Active ingredient: fluorinated polyester
Solvent: fluorinated carbon
Density: 1.68 g/cm³
Boiling point: 56 °C
Flashpoint: non-flammable
Toxicity: non-toxic
Technical data - film:
Film thickness: approx. 0.01 – 0.05 µm
Surface tension: approx. 11 dyn/cm¹
Temperature resistant to 200 °C
nameEpilame
descriptionFixodrop ES/BS-10
type8981
manufactureMoebius
contents100 ml
item No.581570